Small apartment organizer, what is the "best practice"?
1. Visual effects, when a tiny space is filled with cabinets, are more apt to look cramped and depressing. We should visually improve this situation.
2. Storage volume, that is, there should be plenty of storage space.
3, Storage efficiency, just putting things down does not help, but it is also convenient to access, not having access to storage makes no sense, but there are countless times when volume and efficiency clash and we need to balance.
4, Environmental concerns, limited space, difficulty in convection, elevated furniture density, resulting in air pollution problems that are often more severe in small housing than in large housing, so we need to consider more environmental concerns when planning storage issues.
Common techniques are:
1. Reduce free-standing cabinets and incorporate storage space into the structure.
2. Proper use of the suspension effect will free up the low-efficiency bottom space, achieve visual lightness, and give the foot a larger walking space.
3, Do not make triangular corners, which extremely difficult to use and are mainly a waste of area.
4, Match cabinets and drawers and plan carefully to balance storage volume and storage efficiency.
5,Use more environmentally friendly materials and minimize painting as much as possible.
Box bed with suspended storage
Storage bed is a small family receiving the first artifact completely, considering that the interior of a box can be compared to the interior of a chest that is usually extra full of stuff, and that a double bed can provide a similar amount of space for 4 large chest-basis store contents.
But the general box bed will be all around the ground, the visual sense is more “stable”, appears slightly full in a limited space, still can walk around the width of higher requirements, so we will tend to do the feeling of suspension. Reduce visual dullness while leaving extra room to move around.
Suspension type structure also can arrange the drawer as it happens in both sides, the box body is arranged in the middle, the article that often takes so can be put in the drawer, the thing that changes the season is put in the box body among, the smaller space needs content more product classification and storage.
A light wardrobe
In general, you may feel that a limited space should be made into a small cabinet. Instead, the smaller the space, the bigger the cabinet. Scattered small cabinets can make a space appear extra cluttered, cutting out extra dimensional edges.
On the contrary, if we store the content space as distant as possible from the focus, so that a whole wall of large cabinets, besides occupying a cabinet depth, will, in fact, the whole view will be cleaner and appear open.Since the space is small, the rate of raising a space is as distant as possible, and the receiver should use the acme, for example, as far as possible from the body of the Cabins, making full use of the long-range data.
next up is how to make your wardrobe “lightweight.” First, or classical technique-suspension, the bottom of the cabinet is usually used at the lowest frequency, and requires crouching to rummage, which is very inconvenient if the back
There is little room in the back, making it more difficult to maneuver. The levitating design releases the low-utilization space, visually alleviating the sense of “weight”, and leaving additional space for the footsteps when walking.
There are also pieces of exteriors that can be placed in the past, such as cleaning robots, charging seats, etc. Second, we should also think of ways in which materials and colors, here not using dark, wood-grain heavy materials, can be used regularly. A white, melamine-paneled flat cabinet door would be great.
Cabinets on a budget
From the outside, we still try to make sure the surfaces are consistent, reduce clutter in the divisions, and try not to expose the side panels if possible. If it can be made into a built-in best-buy refrigerator, the dishwasher can be chosen as often as possible with the same door panels. In the aforementioned box bed, separate the common and unusual items, the commonly used items in the drawers, and the less commonly used items in the cabinets. Also be the same when designing ambry, appropriate collaboration of all sorts of pull baskets, drawer. Then there’s the cabinet, planning out any nooks and corners.
To make the most of the scattered space
Consider receiving additional model furnaces that do not appear to be as far apart as possible, that are clean and relaxed in the vista, and that can also be made to have a slightly dimmed feel.The decorative panel at the back of the sofa juts out into a corner to accommodate a wireless router, and the last of the regularly turned books can be stowed here, too.
Use a door-porch made shoe ark to store as much content space as possible in a dimensional layout without leaving a large number of separate cabinets. A hole board made on the side of a desk.
To make the most of the scattered space
Consider receiving additional model furnaces that do not appear to be as far apart as possible, that are clean and relaxed in the vista, and that can also be made to have a slightly dimmed feel.
The decorative panel at the back of the sofa juts out into a corner to accommodate a wireless router, and the last of the regularly turned books can be stowed here, too.
Use a door-porch made shoe ark to store as much content space as possible in a dimensional layout without leaving a large number of separate cabinets. A hole board made on the side of a desk.
